Enabling WMM

The following procedure describes how to enableWMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).for wireless clients:

1.In theManaged Networknode hierarchy, navigate toConfiguration > System> Profiles.

2.InAll Profiles, expandWireless LAN > Virtual AP > default > SSID.
This example uses thedefaultprofile.

3.InSSID Profile,select theWireless Multimedia (WMM)check box.Or, select theWireless Multimedia U-APSD (WMM-UAPSD) Powersavecheck box if you want to enable WMM in power save mode.

4.ClickSubmit.

5.ClickPending Changes.

6.In thePending Changeswindow, select the check box and clickDeploy changes.

The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.命令配置WMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).for wireless clients:

(host) [md] (config) #wlan ssid-profile default

(host) ^[md] (SSID Profile "default") #wmm

(host) ^[md] (SSID Profile "default") #wmm-uapsd

You also configureWMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.mapping in decrypt-tunnel.

配置个子DSCP Mapping in Decrypt-tunnel

Starting fromArubaOS8.4.0.0WMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.mapping supports IPv6 packets in the upstream direction of the decrypt tunnel mode. TheWMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).mapping for IPv4 and IPv6 is controlled by theDSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.mapping knob. When this knob is enabled in the decrypt-tunnel mode, theDSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.is mapped according to theWMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).configuration for both IPv4 and IPv6 packets. When this knob is disabled in the decrypt-tunnel mode, there is no change to theDSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.mapping for both IPv4 and IPv6 packets. You can use the WebUI orCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.to configureDSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.mapping in decrypt-tunnel.

The following procedure describes how to enable theWMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.Mapping:

1.In theManaged Networknode hierarchy, navigate toConfiguration > System> Profiles.

2.InAll Profiles, expandWireless LAN > SSID. Select theSSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network.profile.

3.InSSID Profilescreen, select theWMM DSCP Mapping Controlcheck box to enable this option. This feature is enabled by default.

4.ClickSubmit.

5.ClickPending Changes.

6.In thePending Changeswindow, select the check box and clickDeploy changes.

The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.command configures theWMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.mapping:

(host) [mynode] #wmm-dscp-mapping

The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.command disables theWMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment.mapping:

(host) [mynode] #no wmm-dscp-mapping