Configuring PSK Remote AP

You can usePSKPre-shared key. A unique shared secret that was previously shared between two parties by using a secure channel. This is used with WPA security, which requires the owner of a network to provide a passphrase to users for network access.authentication to provision an individualremote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.or a group ofremote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.using anIKEInternet Key Exchange. IKE is a key management protocol used with IPsec protocol to establish a secure communication channel. IKE provides additional feature, flexibility, and ease of configuration for IPsec standard.PSKPre-shared key. A unique shared secret that was previously shared between two parties by using a secure channel. This is used with WPA security, which requires the owner of a network to provide a passphrase to users for network access..

The following procedure describes how to configurePSKPre-shared key. A unique shared secret that was previously shared between two parties by using a secure channel. This is used with WPA security, which requires the owner of a network to provide a passphrase to users for network access.authentication forRemote AP:

1.In theManaged Networknode hierarchy, navigate to配置>Access Points > Remote APs选项卡。

2.Select the requiredRemote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.and clickProvision.

3.In theGeneraltab, selectPre-shared Keyfrom theAuthentication methodsdrop-down list.

4.Enter and confirm theIKEInternet Key Exchange. IKE is a key management protocol used with IPsec protocol to establish a secure communication channel. IKE provides additional feature, flexibility, and ease of configuration for IPsec standard.PSKPre-shared key. A unique shared secret that was previously shared between two parties by using a secure channel. This is used with WPA security, which requires the owner of a network to provide a passphrase to users for network access..

5.SelectGlobal User Name/passwordor aPer AP User Name/PasswordfromUser credential assignmentdrop-down list.

a.If you use thePer AP User Names/Passwordsoption, eachRemote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.is given its own username and password.

b。If you use theGlobal User Name/Passwordoption, all selected RAPs are given the same (shared) username and password.

6.Enter the user name, and enter and confirm the password. If you want themanaged deviceto automatically generate a user name and password, selectUse Automatic Generation. If this option is not selected, the user has to enter it manually.

7.ClickSubmit.

8.ClickPending Changes.

9.In thePending Changeswindow, select the check box and clickDeploy changes.

Add the User to the Internal Database

The following procedure describes how to add the user to the Internal database:

1.In theManaged Networknode hierarchy, navigate to the配置>Authentication>Auth Servers选项卡。

2.From theAll Serverstable, select内部under theNamefield.

3.Click+in the用户选项卡。The内部Server > Add New Userpage is displayed.

4.Enter theUser NameandPassword.

5.ClickEnabledcheck box to activate this entry on creation.

6.ClickSubmit. Note that the configuration does not take effect until you perform this step.

7.ClickPending Changes.

8.In thePending Changeswindow, select the check box and clickDeploy changes.

The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.commands add the user to the Internal database:

Execute the following command:

(host) [mynode] (config) #local-userdb add username rapuser1 password