VPN Pools

下面的过程ure describes how to create a pool of addresses used byVPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two.clients:

1.In theManaged Networknode hierarchy, navigate toConfiguration > Services > VPN.

1.Expand theGeneral VPNaccordion.

2.Click+below theAddress Pools创建一个新表VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two.address pool

3.In thePool namefield, enter a name to the new pool.

4.In theStart address IPV4 or V6field, enter the IP address at the start of the range of addresses.

5.In theEnd address IPV4 or V6field, enter the IP address at the end of the range of addresses.

6.ClickSubmit.

7.ClickPending Changes.

8.In thePending Changeswindow, select the check box and clickDeploy Changes.