Configuring a Windows Server

The following table defines parameters for a Windows server used for stateful NTLM authentication.

Table 1:Windows Server Configuration Parameters

Parameter	Description
Host	IP address of the server. 默认值:N / A
Mode	Enables or disables the server. Default: enabled
Windows Domain	Name of the Windows Domain assigned to the server.

The following procedure describes how to configure a Windows server:

1.In the流动性的主人node hierarchy, navigate to theConfiguration > Authentication > Auth Serverstab.

2.To configure a Windows server, click+underAll Servers. Enter theNameandIP address/hostnameof the server. Set theTypetoWindowsand clickSubmit.

3.Select the server created to configure server parameters. Enter the parameters as described inTable 1.

4.Select theModecheck box to activate the authentication server.

5.ClickSubmit.

6.ClickPending Changes.

7.In thePending Changeswindow, select the check box and clickDeploy changes.

The configuration does not take effect until you perform this step.

The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.commands configure a Windows server:

(host) [mynode] (config) #aaa authentication-server windows

host

enable