ArubaOS 8.6.0.0Help Center
You are here: Home > Access Points > 2.4 Ghz and 5 Ghz Radio RF Management > WebUI Enhancements to Support Dual 5 GHz Radio Mode

WebUI Enhancements to Support Dual 5 GHz Radio Mode

You can find the newDual 5GHz modeoption in the following paths in theManaged Networknode hierarchy:

Configuration > System > Profiles > AP > AP system profile.

据美联社组>概要配置> >> AP system > AP system profile: (make sure theUsername > Preference > show advanced profilesoption is enabled)

The representationalArubaOS8.4.0.0 screenshots for these paths are as follows:

Dual 5 GHz option - path 1

Dual 5GHz mode option - path 2

For a stand-alonecontrolleror a mastercontroller,Dual 5GHz modeoption is available in theConfiguration > AP Groups > > Radio > Advancedpath.

The representationalArubaOS8.3.0.0 screenshot illustrating theDual 5GHz modeoption for a stand-alone or a mastercontrolleris as follows:

Stand-alone or master controller's Dual 5GHZ mode option

The WebUI may change in a subsequent release forUIUser Interface.enhancement purposes.

When you select anAP-344access point model in the Access Points table, you can see two additionalAntenna Gainfields to set values for Radio 0 and Radio 1 for Dual 5GHzGigahertz.mode. Find these parameters in the following paths:

Configuration > Access Points >Campus APsCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on..

Configuration > Access Points >Remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link..

Configuration > Access Points > Mesh APs.

The representationalArubaOS8.3.0.0 screenshot for the Antenna Gain parameter ofCampus APs is as follows:

Antenna Gain

Use the following procedures to define and manage the most common802.11a802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps.(5GHzGigahertz.) and802.11g802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network.(2.4GHzGigahertz.)RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals.management settings using the WebUI orCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.:

WebUI Enhancements to Support Dual 5 GHz Radio Mode

WebUI Enhancements to Support Dual 5 GHz Radio Mode

/*]]>*/
Baidu